Threaded studs & standoffs
Show me versatile and time-saving threaded studs for fastening on concrete and steel – such as grating, grounding, light cable trays or multi-purpose fastenings
40 Products
Filter
New
ultimate
- Description
- Threaded stud for fastening grating and checker plate to steel
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Equivalent corrosion protection as A4(316)
New
ultimate
- Description
- Threaded screw-in stud (multilayer coated carbon steel - corrosion protection comparable to HDG) for electrical connections on steel in mildly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
premium
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on concrete (8 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
ultimate
- Description
- Threaded screw-in stud (carbon steel, metric thread) for electrical connections on steel in mildly corrosive environments. Recommended maximal cross-section of connected cable: 120 mm²
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded screw-in stud (Carbon Steel, Metric or Whitworth thread) for multi-purpose fastenings on steel in mildly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric or Whitworth thread) for electrical connections on steel in highly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments, recommended maximal cross section of connected cable 120 mm²
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric thread) for grating fastenings on steel and aluminum in highly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded screw-in stud (carbon steel, metric thread) for grating fastenings on steel in mildly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric or Whitworth thread) for multi-purpose fastenings on steel in highly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric thread) for electrical connections on steel in highly corrosive environments - Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for multi-purpose fastenings on aluminium in highly corrosive environments
- Point type
- Blunt tip
- Base materials
- Aluminium
- Minimum thickness of base material (steel)
- 6 mm
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for electrical connections on steel in highly corrosive environments
- Point type
- Blunt tip
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
ultimate
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Threaded stud for fastenings on coated steel
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Equivalent to A4 (316) stainless steel
ultimate
- Description
- Threaded stud for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
ultimate
- Description
- Threaded stud for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Extension adapter for M8 threaded studs in highly corrosive environments
- Application
- Grating
- For use with (tools)
- BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
- Corrosion protection
- Stainless steel A4(316) or equivalent
New
ultimate
- Description
- Threaded stud for multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A2
ultimate
- Description
- Threaded stud for multi-purpose fastenings on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Description
- Threaded stud for electrical connectors on steel in highly corrosive environments
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Equivalent corrosion protection as A4(316)
ultimate
- Description
- Coupling nut for fastening MEP installations to steel using S-BT or X-BT studs
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Duplex coating equivalent to 45 µm hot dipped galvanized
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on concrete or for sprayed concrete testing
- Base materials
- Concrete (soft)
- Corrosion protection
- Galvanized zinc coated 5-13 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Carbon steel threaded stud for use with powder-actuated tools on steel (8 mm washer) – for indoor use only
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
New
premium
- Description
- Threaded stud for grating and multi-purpose fastenings on steel in mildly corrosive environments
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Stainless steel A4(316) or equivalent
premium
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on concrete (8 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (10 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (12 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Carbon steel threaded stud for use with the DX-Kwik pre-drilling technique and powder actuated nailers on concrete (8 mm washer)
- Base materials
- Concrete (tough), Concrete (very tough), Concrete (soft)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on concrete (10 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (10 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Threaded studs for use with the BX 3-SCT Spray concrete testing tool
- Base materials
- Concrete
- Corrosion protection
- Galvanized zinc coating 5-13 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Carbon steel threaded stud for use with powder-actuated nailers on concrete (12 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on concrete (10 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor
premium
- Description
- Stainless steel threaded stud for use with powder actuated nailers on concrete (8 mm washer)
- Base materials
- Concrete (soft), Concrete (tough)
- Corrosion protection
- Stainless steel A4(316) or equivalent
- Environmental Conditions
- Dry indoor, Indoor environments with temporary condensation, Outdoor temporary applications, Outdoor, rural or urban environment with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor, areas with heavy industrial pollution
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (8 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
premium
- Description
- Threaded stud for multi-purpose fastenings on steel (8 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Equivalent to A4 (316) stainless steel
premium
- Description
- Threaded stud for multi-purpose fastenings on steel (10 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 6 mm
- Corrosion protection
- Equivalent to A4 (316) stainless steel
premium
- Description
- Carbon steel threaded stud for use with powder actuated nailers on steel (12 mm washer)
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
New
premium
- Description
- M6 threaded stud for use with the BX 3 cordless nailer
- Base materials
- Steel, Concrete (soft), Masonry (grout filled concrete block), Masonry (solid limestone brick)
- Corrosion protection
- Galvanized zinc coated <20 µm
- Environmental Conditions
- Dry indoor